Brew this month
KegLand MKII Magnetic Drive Pump, 13.5 GPM, 110VKegLand MKII Magnetic Drive Pump, 13.5 GPM, 110V, view 2KegLand MKII Magnetic Drive Pump, 13.5 GPM, 110V, view 3
KegLand

KegLand MKII Magnetic Drive Pump, 13.5 GPM, 110V

A magnetic drive pump with an adjustable 304 stainless center-inlet head, 3/4-inch BSPT fittings and a 248°F (120°C) maximum temperature.

Brewing systems & chillersGoing all-grain
  • 13.5 GPM peak flow
  • Up to 248°F (120°C)
  • Water-resistant casing

Best for Recirculating or transferring hot wort

View on Amazon

Opens the product page with today’s price, variants and delivery. We may earn a commission at no extra cost to you. For adults 21+.

Specifications

Power110V / 60 Hz, 65 W
Material304 stainless pump head
Volume13.5 GPM peak, 15–21 ft head

As stated by the maker or seller. Specs can change between versions and sellers; confirm on the listing. We did not test this product.

From the maker

  • Voltage & Frequency: 110V / 60Hz
  • Maximum Head: 15-21 Feet
  • Peak Flow: 13.5 Gallons per Minute
  • Maximum Temperature: 248F (120C)
  • Adjustable 304 Stainless Steel Pump Head
  • Fittings: 3/4" BSPT
Electric brewing: GFCI and a licensed electricianPlug 120V and 240V systems only into a GFCI-protected circuit of the type the manual calls for, with no extension cords. A 1600 W system on 120V draws about 13.3 A (W ÷ V), close to a 15 A circuit’s limit. Have a licensed electrician install any new circuit, 120V or 240V.Source: Anvil Foundry manual (GFCI protection for 240V hookups); W ÷ V arithmetic
Strike water calculatorStrike and infusion water temperatures (Palmer).Dilution and boil-off calculatorPre-boil volume from your boil-off rate.

Full listing title: KegLand MKII Magnetic Drive Pump | Center Inlet Pump Head | Stainless Steel | 13.5 GPM | 65 Watt

Compare with

All brewing systems & chillers