DERNORD

DERNORD 5500W 240V Ripple Heating Element, 1 in. NPSM

A low-watt-density stainless foldback heating element, 5500 W at 240V, on a 1-inch NPSM thread. 240V wiring calls for a licensed electrician.

  • 5500 W at 240V
  • Low watt density
  • 1 in. NPSM thread

Best for 240V eBIAB builds

View on Amazon

Opens the product page with today’s price, variants and delivery. We may earn a commission at no extra cost to you. For adults 21+.

Specifications

TypeElectric heating element
Power240V, 5500 W
MaterialStainless, low watt density

As stated by the maker or seller. Specs can change between versions and sellers; confirm on the listing. We did not test this product.

From the maker

  • Low Watt Density Stainless Steel Immersion Ripple Foldback heating element
  • Provides 5500w 240v of power
  • The shape is to minimize length and maximize heated surfaces
  • Easy to Install and fits most Water Heater Models of American
  • Resists dry firing, lime deposits, and sand that would burn out ordinary elements
Electric brewing: GFCI and a licensed electricianPlug 120V and 240V systems only into a GFCI-protected circuit of the type the manual calls for, with no extension cords. A 1600 W system on 120V draws about 13.3 A (W ÷ V), close to a 15 A circuit’s limit. Have a licensed electrician install any new circuit, 120V or 240V.Source: Anvil Foundry manual (GFCI protection for 240V hookups); W ÷ V arithmetic
Strike water calculatorStrike and infusion water temperatures (Palmer).Dilution and boil-off calculatorPre-boil volume from your boil-off rate.

Full listing title: DERNORD 240V 5500W Immersion Ripple Foldback Brewing Water Tubular Heater Element with 1 Inch NPSM Thread White