Brew this month
Chugger X-Dry Inline Stainless Pump, 115V, 1/2 in. MPTChugger X-Dry Inline Stainless Pump, 115V, 1/2 in. MPT, view 2Chugger X-Dry Inline Stainless Pump, 115V, 1/2 in. MPT, view 3Chugger X-Dry Inline Stainless Pump, 115V, 1/2 in. MPT, view 4Chugger X-Dry Inline Stainless Pump, 115V, 1/2 in. MPT, view 5Chugger X-Dry Inline Stainless Pump, 115V, 1/2 in. MPT, view 6
Chugger Pumps

Chugger X-Dry Inline Stainless Pump, 115V, 1/2 in. MPT

An ETL-certified inline pump with run-dry carbon bearings, 1/2-inch MPT ports and a 55-inch plug-in cord. It is not self-priming, so the head must be flooded first.

Brewing systems & chillersGoing all-grain
  • ETL certified
  • Run-dry protection
  • Not self-priming

Best for Certified pump for a brew rig

View on Amazon

Opens the product page with today’s price, variants and delivery. We may earn a commission at no extra cost to you. For adults 21+.

Specifications

TypeBrewing pump
Power115V, 1.9 A (motor and pump)
MaterialStainless steel, food-compliant materials

As stated by the maker or seller. Specs can change between versions and sellers; confirm on the listing. We did not test this product.

From the maker

  • ETL-Certified; Food Compliant Materials; UL Recognized; Sturdy 115-Volt (50/60HZ) Booster Pump With 55" Electric Cord with plug; Non-Submersible; Comparable to March 815-SS-Beer Pump
  • Transfers Flow of Hot and Cold Liquids Between Brewing Vessels or Kettles; Cools Wort Via a Counter-Flow Chiller; Recirculates Ice Water for Quicker Chilling; Circulator Pump with 316 Stainless Steel Front and Rear Housing; Made by…
  • Light Enough to Be Portable; High-Quality Stainless Steel Pump Head Eliminates Stripped Threads; Head is Interchangeable with Existing March Pump Motors; Magnetic Drive with Base, Teflon Thrust Washer, Clear Silicone O-Ring, and…
  • Max Flow Rate of 7 GPM 26.5 LPM; 18.6-Feet 4.1M of Max Head to Handle Back-Pressure; Device is Capable of Handling Liquids of Different Temperatures Up to 250 Degrees F
Electric brewing: GFCI and a licensed electricianPlug 120V and 240V systems only into a GFCI-protected circuit of the type the manual calls for, with no extension cords. A 1600 W system on 120V draws about 13.3 A (W ÷ V), close to a 15 A circuit’s limit. Have a licensed electrician install any new circuit, 120V or 240V.Source: Anvil Foundry manual (GFCI protection for 240V hookups); W ÷ V arithmetic
Strike water calculatorStrike and infusion water temperatures (Palmer).Dilution and boil-off calculatorPre-boil volume from your boil-off rate.

Full listing title: CHUGGER PUMP XCPSS-IN-1 X-DRY with Run Dry Protection, SS 115 Volt Inline Home Brewing System Beer Pump, 55" Cord w/Plug, 1/2" MPT Connections, ETL-Certified, US Food Compliant Materials

Compare with

All brewing systems & chillers