Brewer's Edge

Brewer’s Edge Mash and Boil Series 2 with Pump, 110V

The Series 2 Mash and Boil adds an integral recirculation pump, a high-flow basket and a low-density element meant to reduce scorching. It plugs into a standard 110V outlet.

  • Integral recirc pump
  • Low-density element
  • Plugs into 110V

Best for Simple 120V all-grain

View on Amazon

Opens the product page with today’s price, variants and delivery. We may earn a commission at no extra cost to you. For adults 21+.

Specifications

Volume30 qt
Power110V
MaterialStainless steel

As stated by the maker or seller. Specs can change between versions and sellers; confirm on the listing. We did not test this product.

From the maker

  • Integral Pump makes it easy to recirculate your mash - just flip the switch
  • New high flow basket increases flow 150% - helps eliminates stuck sparges
  • New low density heating element helps prevent scorching
  • New close range digital thermostat holds the temperature precisely
  • Newest Model - Electronics up at top - Plugs into any 110 volt outlet
Electric brewing: GFCI and a licensed electricianPlug 120V and 240V systems only into a GFCI-protected circuit of the type the manual calls for, with no extension cords. A 1600 W system on 120V draws about 13.3 A (W ÷ V), close to a 15 A circuit’s limit. Have a licensed electrician install any new circuit, 120V or 240V.Source: Anvil Foundry manual (GFCI protection for 240V hookups); W ÷ V arithmetic

Featured in

Strike water calculatorStrike and infusion water temperatures (Palmer).Dilution and boil-off calculatorPre-boil volume from your boil-off rate.

Full listing title: Brewers Edge Brewer's Edge SERIES 2 MASH AND BOIL With Pump V2 Programmable Electric All-In-One Brewing Kettle 110V